Nissei WSK-1011 Mode D'emploi page 10

2 ADJUST THE MONITOR TO THE HEIGHT OF YOUR HEART.
Place a folded towel or similar
under your arm to support it so that
the cuff is kept at the height of your
heart during measurement.
Hold your elbow if you do not have an appropriate table to put your elbow on.
Measurement can be made lying on your back. Make sure that the cuff is at the
height of your heart.
If the cuff is lower (higher) than the heart, the measured reading
tends to become larger (smaller).
Take deep breaths and relax.
Do not move or speak while
taking your blood pressure.
Do not cross your legs during
measurement.
Do not hold your breath.
3
TURN ON THE MONITOR.
Touch "START/STOP" KEY.
Air is exhausted from the cuff.
Automatic inflation starts.
Inflation stops at optimal pressure
and pressure starts to decrease.
PULSE SYMBOL is displayed as
pulse is detected.
Touch "START/STOP" KEY
SDG!DFGSGLK
SJPREJDKLFJGS
again
OGJOIER;J
measurement.
The monitor will exhaust air
from the cuff and turn off.
-10-
START/STOP
to cancel
DEFLATION
SYMBOL
INFLATION
SYMBOL
PULSE
SYMBOL