English
PRECAUTIONS ON USING HAMMER DRILL
1. Wear earplugs to protect your ears during
operation.
2. Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
SPECIFICATIONS
Voltage (by areas)*
Power Input
No-load speed
Full-load impact rate
Capacity: concrete
steel
wood
Weight (without cord and side handle)
Dust collecting adapter
Max. hole-drilling depth:
Diameter of drill:
Max. length of drill (overall length):
Dustbag capacity:
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Case (Molded plastic) ................................................. 1
(2) Side handle ................................................................. 1
(3) Dust collecting adapter .............................................. 1
(4) Dust bag ...................................................................... 1
OPTIONAL ACCESSORIES (sold separately)
1. Drilling anchor holes (rotation + striking)
Drill bit (Slender shaft)
Drill bit (Slender shaft)
Outer diameter
3.4 mm
3.5 mm
Drill bit (Taper shank) and taper shank adapter
Drill bit (Taper shank)
7
100 mm (adjustment possible between 0 and 100 mm)
Adapter for slender shaft
(SDS-plus shank)
Drill bit (slender shaft)
Effective length
45 mm
Taper shank adapter
(SDS-plus shank)
Cotter
3. Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
4. Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
620W*
0 – 1050/min.
4400/min.
3.4 – 24 mm
13 mm
32 mm
2.6 kg
3.4 – 24 mm
270 mmm
0.4 liters
[Numbers (3) and (4) refer to use on concrete]
(5) Cap .............................................................................. 1
Standard accessories are subject to change without
notice.
Overall length
90 mm