- en -
Dear customer
Thank you very much for choosing a weka product.
Read these instructions through completely before assembling your product in order to avoid errors in
assembly or damage.
IMPORTANT
Please use the enclosed packing list to check immediately that your weka product has been
delivered complete and intact.
Please do not dispose of the packing list before the guarantee period has expired. This list enables you
to check that all the individual parts are present. It should be retained along with the proof of purchase.
Any complaints which may arise can probably be easily rectified with this list. The item numbers on the
packing list do not correspond to the item numbers in the following assembly instructions.
We recommend that 2 people carry out the assembly.
In order to prevent accidents, we recommend that children are kept out of the direct vicinity during
assembly.
We reserve the right to make further technological developments. This means that there many be minor
deviations in the illustrations.
Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.
Attention!
For domestic use only.
Use is permitted only under the direct supervision of an adult!
Attention!
Only suitable for children up to 6 years of age!
Attention!
Max. usage weight: 50 kg
Attention!
It is prohibited to walk on the roof.
Attention!
The threaded joints must be periodically checked and re-tightened.
The toy is suitable for inside and outside and must be anchored to the floor or ground with suitable means to
prevent it from tipping over.
Changes to the product or to individual components are not permitted and will result in loss of warranty.
RECOMMENDATIONS / WOOD PROTECTION
Please drill pilot holes for all screw connections to avoid damaging the wood.
In order to avoid rising damp, we recommend that a barrier layer using the packaging film, roofing paper
or similar be laid between the foundation and the floor beams.
Roofing paper for a barrier layer is not included in the scope of this delivery.
Before and during assembly, protect untreated wood from direct sunlight or moisture.
We recommend that you consult an expert in wood treatment agents.
Once the structure has been assembled, give the exterior of the entire construction at least two
coats of an open-pore wood protection agent.
A regular coating in accordance with the manufacturer's instructions of the wood protection
agent is necessary to protect the wood.
TOOL
You should have the following tools to hand before beginning assembly. (Not supplied.)
Spring tape measure
Techn. Änderungen vorbehalten!
Spirit level
2
Drill
Electric screwdriver
Copyright weka-Holzbau GmbH, Neubrandenburg