Rear Panel - Viscount Choir Master Guide De L'utilisateur

User Manual

3.2 REAR PANEL

1. [AC INPUT] connector: plug the (included) power cable here.
2. [POWER ON] switch: on/off switch.
NB:
Make sure that the switch is set as 0 before connecting the power cable.
3. MIDI connectors:
[IN]: Choir Master receives MIDI data from an external unit through
-
this input connector.
[OUT]: Choir Master sends out MIDI data through this connector.
-
the cable plugged in this connector must be connected to the MIDI
IN port of the playing instrument.
- [THRU]: transmits the incoming data from the [IN] port to other
MIDI devices.
4. [USB] ports: plug a USB drive (not included) to the type A connector (the
one on the right) to use it as an external memory. Type B connector (on the
left) is unused at the moment and will be needed for future software
developments.
5. [A.PANEL] connector: the optional external display (Annunciator Panel)
should be connected here through an Ethernet RJ45 cable.
1 2 3 4 5
75
Choir Master
Viscount
6 7
8