Setting Display Contrast - Viscount Choir Master Guide De L'utilisateur

User Manual
To calibrate, move the pedal to its maximum position. Then press [q] and
set the pedal to its minimum. Press [ENTER] again.
o INACTIVE: no function assigned to the pedal. It is best to select this
function when no pedal is connected.
Press [EXIT] to save and quit.
N.B.:
The system can automatically detect the pedal type (open foot switch,
closed foot switch, expression pedal), even if the pedal is connected
while the Choir Master is already on. However, since there is a
multitude of different pedals, making self-detection difficult, it is
recommended to plug in the pedal(s) while the Choir Master is off;
after it is on, do not modify the switch's position (on/off).

9.4 SETTING DISPLAY CONTRAST

To set the display contrast according to the ambient light, enter the SETUP
menu and select the LCD CONTRAST field:
Press the [+] and [-] buttons to set the correct value, then press [EXIT] to save
and quit.
Viscount
119
Choir Master