Selecting The Numerical Panel Transmission Mode - Viscount Choir Master Guide De L'utilisateur

Choir Master
Viscount
9.5 SELECTING
TRANSMISSION MODE
The optional numerical panel, indicating the code of the current song, can be
connected to the Choir Master by cable ([A. PANEL] or [MIDI OUT] ports)
or wireless. For further information, read the Annunciator Panel Handbook.
Once the panel has been successfully connected, it needs to be activated.
To do so, enter the SETUP menu and select the A.PANEL LINK MODE.
Use the [+] and [-] buttons to select the connection mode:
o RADIO: connect the panel to Choir Master via radio waves (needs an
antenna). Moreover, you can find the CHANNEL parameter. This
parameter sets the radio channel in use: if there are several Viscount
instruments with radio devices nearby, set a different channel to avoid
interference.
o SERIAL: connect the panel via cable through the [A.PANEL] connector.
o MIDI: connect the panel via cable through the [MIDI OUT] connector.
Press [EXIT] to save and quit.
THE NUMERICAL
120
User Manual
PANEL