Technical Characteristics Of The Starcus K06/K10 Drive; Construction And Operation - krispol STARCUS K06 Notice D'utilisation

3.2. Technical characteristics of the STARCUS K06/K10 drive

NOTE! The product may be operated only after the installation process is fully
completed, which should be ended by a full final inspection by the installer.
As a result, you should receive:
• this user manual of the drive,
• the user manual of the garage door,
• manual for regular maintenance (an integral part of the garage door manual),
• the Report Book (an integral part of the garage door manual),
• declaration of Conformity signed by an authorized installer (after functional tests of the garage doors with the drive and making
sure that the drive, control and all protection devices work properly).
Then you can use the garage door with drive!
Parameter
Type
Power supply
Electric motor
Maximum input power
Power consumption
Pulling power
Lighting
Lighting working time
Emitted sound pressure level
Permissible ambient temperature
Relative humidity
Frequency of the receiver
The maximum distance from the ceiling
Normal speed without load
Maximum frequency of cycles
Maximum continuous working time
Protection level
Parameter
Type
Frequency
Coding
Buttons
Diode
Power supply
Battery type
Capacity
Permissible ambient temperature

3.3. Construction and operation

The drive is equipped with:
• control board,
• gear motor,
• a push-button panel with display,
• LED lighting.
It is mounted on under the ceiling. A remote control is a basic equipment for controlling the garage door. The drive may be also controlled
by a key switch or a bell button connector (depending on the equipment configuration).
Additional equipment consists of:
• key switch,
• bell button connector,
• photocells,
• reed switch (for sectional garage doors equipped with service door).
18
EN
Technical data of STARCUS Drive
Unit
-
W
A
N
-
s
dB(A)
°C
%
MHz
mm
cm/s
%
s
IP
Technical data of the transmitter
Unit
-
MHz
-
pcs.
V
-
mAh
°C
Drive
K06
The drive for the automation of garage doors
230VAC (+-10%) 50Hz
150
0,7
600 1000
LED
180
max 70
-20 do +50
≤ 90
433,92
1000
16
DE 40%
60
21
Transmitter
3-channel transmitter, remotely
433,92
Variable code system
4
3
2x CR2016
220
-20 do +50
K10