LITE
13
Run power cables to the hatch and secure the
supplied terminals on them, positioning the
supplied 2-way box.
Caution: Match the cables as indicated R= (+) and
N= (-).
!
Caution: The cable to be installed must be 6 mm section; the (+) cable must be protected with a 30A
fuse.
Important: Due to the equipment's complex electronic regulation system, the current connection must
be made directly to the battery point or authorised connection point, and not to any other point which
services other accessories of the vehicle, taking the precaution to not invert polarity when making the
connection.
Important: Check the user manual for starting up.
14
Introduce the console in the front, remove the lights
cables through the console gaps and secure the
console with (4) 6/100x15 Allen screws, screwing
on hexagonal spacers.
Caution: The wide part of the console in the front
part of the cabin.
15
Connect the lights and fit them in the console.
15
13
14
15
19
EN
®