Brother QL-710W Guide D'installation Rapide page 12

6
DK Roll (DK Label and DK Tape)
•
Use only genuine Brother accessories and supplies (with
unauthorized accessories or supplies.
•
If the label is attached to a wet, dirty, or oily surface, it may peel off easily. Before
applying the label, clean the surface to which the label will be applied.
•
DK Rolls use thermal paper or film that can fade in color or peel off surfaces if exposed
to ultraviolet light, wind or rain.
•
Do not expose the DK Rolls to direct sunlight, high temperatures, high humidity, or dust.
Store in a cool, dark place. Use the DK Rolls soon after opening the package.
•
Scratching the printed surface of the label with your finger nails or metal objects, or
touching the printed surface with hands dampened by water or sweat can cause the
color to change or fade.
•
Do not apply labels to any persons, animals, or plants. In addition, never apply labels to
public or private property without permission.
•
As the end of the DK Roll is designed to not adhere to the label spool, the last label may
not be cut properly. If this happens, remove the remaining labels, insert a new DK Roll,
and reprint the last label.
Note: To account for this, the number of DK Labels included on each DK Roll may be
more than indicated on the package.
•
When a label is removed after being applied to a surface, a portion of the label may
remain.
•
Prior to using CD/DVD labels, be sure to follow the instructions in your CD/DVD player's
instruction guide regarding applying CD/DVD labels.
•
Do not use CD/DVD labels in a slot loading CD/DVD player, for example a CD player in
a car where the CD is slid into a slot in the CD player.
•
Do not peel off the CD/DVD label once it is applied to the CD/DVD, a thin surface layer
may come off, resulting in damage to the disk.
•
Do not apply CD/DVD labels to CD/DVD disks designed for use with ink jet printers.
Labels peel off these disks easily and using disks with peeled labels can result in loss or
damage of data.
•
When applying CD/DVD labels, use the applicator included with the CD/DVD label rolls.
Failure to do so could cause damage to the CD/DVD player.
•
Users shall take full responsibility for applying CD/DVD labels. Brother accepts no
responsibility for any loss or damage of data caused by the inappropriate use of CD/DVD
labels.
•
Be careful not to drop the DK Roll.
•
DK Rolls use thermal paper and thermal film. Both the label and print will fade with
sunlight and heat. Do not use DK Rolls for outdoor use that requires durability.
•
Depending on the area, material, and environmental conditions, the label may unpeel or
become irremovable, or the color of the label may change or be transferred to other
objects. Before applying the label, check the environmental conditions and the material.
Test the label by affixing a small piece of it to an inconspicuous area of the intended
surface.
CD-ROM and Software
•
Do not scratch or subject the CD-ROM to high or low temperatures.
•
Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.
•
The software contained on the CD-ROM is meant for use with this machine only. See the
License on the CD-ROM for details. This software may be installed on multiple
computers for use in an office, etc.
, marks). Do not use any