Brother QL-710W Guide D'installation Rapide page 10

4
Do not use the machine with foreign
objects in it. Do not drop any metal
objects such as paper clips and staples
into the machine. If water or any foreign
objects should enter the machine,
unplug the power cord from the electric
outlet and remove the foreign object. If
necessary, contact the retail outlet
where the machine was purchased or
your local authorized service center.
Do not allow organic solvents (benzene,
paint thinner, nail polish remover,
deodorizer, etc.) to come into contact
with the machine and its connecting
cables. Doing so may cause the
equipment to deform or dissolve, and
there may be a risk of electrical shock or
fire.
Do not touch the machine during a
severe thunderstorm, as this may result
in electrical shock.
Follow these guidelines to avoid fire, electric shock, or other damage.
Power Cord
Use only the authorized power source
(120V AC) for the machine.
Use only the power cord included with
the machine.
Do not handle the power cord or plug if
your hands are wet.
Do not overload the electrical outlet with
too many appliances or plug the power
cord into a damaged electrical outlet.
Do not cut, damage, alter or place heavy
objects on the power cord.
Regularly remove the power plug from
the electrical outlet, and clean the base
of the prongs and between the prongs. If
you leave the power plug in the electrical
outlet for an extended period of time,
dust will accumulate at the base of the
power plug prongs. This could cause a
short circuit that may result in a fire.
Do not use the power cord if it is
damaged.
Ensure the power cord is correctly
inserted into the electrical outlet.
WARNING
Make sure to turn off the machine and
remove the power cord from the
electrical outlet when cleaning the
machine. Failure to do so could cause
an electrical shock or fire.
To avoid possible fire or electrical shock,
never disassemble the machine or allow
it to get wet.
Do not use paint thinner, benzene,
alcohol or any other organic solvents to
clean the machine. Doing so may cause
damage to the surface finish. Use a soft,
dry cloth to clean the machine.
Do not put any heavy objects or objects
containing water on top of the machine.
If water or any foreign object enters the
machine, contact the retail outlet where
the machine was purchased or your
local authorized service center. If you
continue to use the machine with water
or a foreign object in the machine, the
machine may be damaged or personal
injury could result.
Do not pull the power cord when
removing the power plug from the
electrical outlet. Doing so could cause
an electrical shock or fire.
Do not damage the power cord in the
following ways as it may result in an
electrical shock, fire or machine
malfunction.
• Modifying the cord
• Forcibly bending the cord
• Placing the cord near a hot object
• Pulling the cord
• Twisting the cord
• Tying the cord
• Placing a heavy object on the cord
• Squeezing the cord into a narrow place
• Hanging the cord on a metal object
• Folding the cord back and forth
• Pushing the cord against a wall
Do not use an extension cord, as this
may result in a fire, electrical shock, or
damage to the machine.