Maintenance - WAGNER PlastMix 15 Mode D'emploi

GB
regulator and drain off the water. Disconnect the supply hose.
Important: Before restarting the machine, ensure that all valves
are closed again.
If the machine is not to be used for several days, empty the
hopper completely.
8

MAINTENANCE

Maintenance must be performed by ade-
quately trained personnel, after switching
off the machine, disconnecting it from the
power supply and emptying the hopper.
Check daily that the water filter (spare parts table 2, pos. 16
and 17) is clean.
Check weekly that the mixer shaft (fig. 1, ref. 8) is in good con-
dition and replace if necessary.
Check weekly that the electric motors are free of dust and dirt
and if necessary clean using compressed air.
Check weekly that the plug and socket contacts are clean, dry
and rust free.
Every 12 months arrange for an inspection of the machine by
an authorised Wagner service centre.
Spent oil is a special waste. Therefore it
must be disposed of according to current
legislation.
Always keep notices and symbols on the
machine legible.
22
PlastMix 15