Polygroup Summer Waves 10298894 Notice De Montage page 15

1. Locate a level and flat area to set up the pool. Make sure the ground is free from sharp objects, as they
may puncture the pool.
2. LIFT the pool liner across the ground. DO NOT drag the liner from one location to another location.
3. Put on the Vertical Leg in each Leg Cap.
4. Lay down all parts on the ground as shown below
3
5
- 3
5. Carefully slide the Horizontal Beams into the sleeves of the pool.
6. Connect the T-Fitting to Horizontal Beam.
2
2
- SET UP INSTRUCTIONS -
- 5 -
4
- 15 -
1
4
- 4 -
- 6 -
2