Settings; Menu - Cristec YPO-DISPLAY-R Manuel Utilisateur

4.4.5 Settings

Setup Operation  Characteristic
The YPOWER chargers are equipped with DIP switches to configure the charger according to battery type and
application. This setting is available in Operation menu second page:
When the YPOWER charger DIP switches are set to A=0 or 1, B=1, C=1 and D=1, setting can be selected by the
remote display itself.
Refer to YPOWER charger user manual for details.
5

MENU

5
4
3
1 = ON
0 = OFF
1 : Access to Display settings
2 : Access to Alarms settings
3 : Home (return to main page)
4 : Access to Charger settings
1
5 : Access to Operation settings (4.4)
2
25