3.3
D
ISPLAY MONITOR
Place the monitor on a dry place where it is easily accessible. The minimum cut-out is 87 x 65 mm
On the top side, a Micro SD-card can be inserted to update the firmware if necessary.
4
OPERATION
4.1
O
VERVIEW
Brightness can be switched between NIGHT and DAY modes by pressing the centre part of the screen.
The brightness of DAY-mode can be adjusted in the setup while NIGHT-mode is fixed.
4.2
AC
NETWORK OFF
The battery charger is off and the battery voltages can be read.
Charger's output is unavailable in this mode, so the ON/OFF charger output press-button [3] is neutral.
4
3
2
1 : Battery voltages
1
2 : Access to parameters
3 : ON/OFF charger output
4 : AC network status
21