Neato botvac D3 connected Mode D'emploi page 12

Using Your Neato Robot Without the Neato App
HOUSE CLEANING
You can initiate House
Cleaning by pressing the
Start Button once. Your
Neato robot will clean the
entire floor on one level
automatically moving
from room to room.
INFO LED
ACTION
Start Cleaning Press Start Button 1x for house cleaning
Press Start Button 2x for spot cleaning
Pause/Resume Press Start Button during cleaning to pause robot.
Cleaning
Press Start Button again to resume cleaning.
Cancel Cleaning Press & hold Start Button for 5 seconds
* NOTE: if the INFO LED light is blinking red or solid red, your robot needs robot
maintenance or your robot has a navigation issue. Please check the troubleshooting
section of this guide.
10
SPOT CLEANING
You can initiate Spot Cleaning
by pressing the Start Button
twice. During Spot Cleaning,
if you press the Start Button,
Initiate
the robot will pause. If you
House Cleaning
press it again, it will resume.
by pressing the
Start Button 1 time.
To cancel the Spot Cleaning,
press the Start Button and
hold it down for 5 seconds.
Place your robot
centered and
facing the area
to be cleaned.
INFO LED
Solid Blue
Solid White
LED pulses during pause
Robot & LEDs turn off &
robot plays a tone.
FEATURES ONLY AVAILABLE
VIA THE NEATO APP
Some features are only available if you
connect your robot to the Neato app on
your smartphone or tablet. These features
include scheduling, push notifications,
context sensitive help, and cleaning statistics
(specific models only).
BATTERY LED
ROBOT IS: LED COLOR WHAT IT MEANS
Solid Green Battery level is normal
Solid Battery level is low. Battery must be
Cleaning
Amber charged before a new cleaning can be
started
Pulsing Battery is charging and robot can start
Green cleaning
Charging
Pulsing Robot is fast-charging the battery and
Amber must complete before cleaning can start
* If Blinking Red, please check the troubleshooting section of this
guide.