Finishing; Glass Door Removal And Installation; Log, Grate And Ember Bed Assembly Removal - Napoleon NEFB24H Instructions D'installation Et D'opération

5.0 FINISHING

POWER SUPPLY SERVICE MUST BE COMPLETED PRIOR TO FINISHING TO AVOID
HEAT VENTS AND AIR OPENINGS CANNOT BE COVERED IN ANY CIRCUMSTANCES.
5.1

GLASS DOOR REMOVAL AND INSTALLATION

FACING AND/OR FINISHING MATERIAL MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL
TO THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
A. Remove the 4 screws off the appliance, as shown.
B. Remove the glass front and place on a soft non-abrasive
surface.
C. Reverse these steps to reinstall the glass front.
5.2

LOG, GRATE AND EMBER BED ASSEMBLY REMOVAL

For Model NEFB24H and NEFB27H:
A. Remove the 2 screws, as shown.
B. Lift the log, grate and ember bed up from
the appliance and remove.
For Model NEFB29H:
A. Remove the packaging materials holding
the logs, grate and ember bed assembly
to the appliance.
B. Pinch the back of the assembly and lift it
up from the appliance.
WARNING
!
RECONSTRUCTION.
WARNING
!
SCREW
* NEFB27H ILLUSTRATED
SCREW
SCREW
EMBER
BED
W415-1454 / B / 06.26.15
15
EN