Napoleon NEFB24H Instructions D'installation Et D'opération page 11

A. Remove the securing screw from the electrical cover plate, located on the right hand side of the
fi replace.
B. Add an electrical box connector and feed the supply wires through the 7/8" (22mm) hole.
C. Separate the black, white and green wires that have the wire nuts on them.
D. Remove the wire nuts and secure the black wire (power L1) to the black (power L1) lead of the
power supply. Connect the white wire from the unit to the white (neutral) wire from the power
supply. Connect the green wire to the ground wire.
E. Resecure the cover plate.
BLACK
WHITE
GREEN
NOTE: Leave enough wire so that the appliance can be removed from the enclosure without
disconnecting the power supply.
(L1)
(N)
(G)
WIRE NUT
BLACK
WHITE
GREEN
W415-1454 / B / 06.26.15
11
EN