Setting Up The Speakers - Teac LS-101HR Mode D'emploi

Setting up the speakers

Precautions for installation
o Do not install in a location that becomes hot,
including places exposed to direct sunlight or
near heating equipment. Doing so could cause
damage.
o Do not install in a location that becomes humid,
including near humidifiers. Moreover, do not install
in a location that become smoky. Doing so could
cause damage.
o Do not place obstructions between the speakers
and the listening position. Obstructions block
the direct sound, which can change the sound
quality.
o Ideally, no items that reflect sound or resonate
should be in the nearby environment. For exam-
ple, glass doors sometimes resonate. To prevent
this, fix them securely or use thick curtains or
similar materials to absorb sound.
In addition, parallel walls make it easy for stand-
ing waves to occur, so place furniture to disrupt
parallel surfaces and use thick curtains or similar
materials to absorb sound.
Speaker placement
o For stereo playback, the left and right speakers
should usually be placed so that they form an
equilateral or isosceles triangle with the listener
at the top corner.
Listening position
4
Attaching silicone speaker
feet (included)
When installing these speakers, you can attach the
included silicone speaker feet to the bottoms of the
speakers if desired.
o Attaching the silicone speaker feet could change
the sound quality. Use of the feet is optional.
o Attaching the silicone speaker feet should reduce
rattling caused by uneven contact between the
speaker and floor surfaces.