Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wall mounted rack and pinion jack
English
Technical Data
pressure force
tension
loading capacity
force
Type
after Euler II
[kN]
030052000
2,5
030052001
2,5
030053001*)
3,0
030053007
5,0
030054003
10
030055131
15
030055026
15
030056138
30
030056006
30
030057134
50
030057002
50
030058009
100
suitable for ambient temperature
*) stainless design
Materials: 1.4301 / 1.4104 / 1.4541; CuZn40Al2; CuSn7Zn Pb
Attention: The resistance has to be checked by the operator before use!
Contact with iron may cause extraneous rust.
Technical Data for special designs see annexed data sheet
Functional description:
Wall mounted racks and pinion jacks with self-locking worm gearing.
Type 030052000, 030052999, 030053001, 030053007, 030053502, 030053504, 030053999, 030054003,
030054506, 030054508, 030054802, 030054803, 030054804, 030054805, 030054999,
The load is held in every position by a self-locking mechanism.
Wall mounted racks and pinion jacks with self-locking spur gearing.
Type 030052001, 030052991, 030055131, 030055026, 030055502, 030055504, 040006516, 040004236,
030055999, 030056138, 030056006, 030056604, 030056606, 030056608, 040006515, 030056999,
030057134, 030057002, 030057999, 030058009, 030058999
The securing mechanism is a load pressure brake (SIFEKU or SIKU see technical data).
The safe function of the load pressure brake (only design with SIKU) is only guaranteed, with loads higher
approx. 5% up to 10 % of the nominal load!
Mounting Instructions
Mounting:
ATTENTION:
• the winches are operated for mounting in different devices,
• the mounting structure and the connection with the head of the rack must be designed to sustain the max. forces
imposed by the winch!
• pay careful attention that the mounting surface is flat and true!
• it is not allowed to brace the winch!
• only fix the winch by means of good quality screws!
• tighten the screws evenly secure the crews!
• ensure that the crank is free running (crank clearance)!
• only centric forces are allowed to introduce in the rack!
• flank forces or momentum's are not allowed!
• the save working from the complete construction, has to be guaranteed and checked by the deliverer from the
complete construction!
design changes under reserve
securing of load
A
B
C
[kN]
2,5
X
2,5
X
3,0
X
5,0
X
10
X
15
X
15
X
X
30
30
X
50
X
50
X
100
X
-10°C +40°C
1.3.102
rack
rack
lift per turn
length
length
of crank
[mm]
[mm]
[mm]
740
550
11
765
600
76
895
600
11
895
700
11
765
600
3,8
1090
800
14
1090
800
14
975
565
8,6
975
565
8,6
1170
700
4,5
1170
700
4,5
1240
700
3,2
Securing the load
A with worm gearing, self-locking
B spur-gearing with safety spring crank
C spur-gearing with safety crank
effort on
weight
crank
[daN]
[kg]
11
9
22
10
11
12
16,5
10
22
11
28
11
28
11
28
19
28
19
1)
Loading capacity
28
28
after Euler II, two
28
28
ends are flexible
run on bearings
40
55
page 8
Publicité
Table des Matières
