Destined Use; Regulations For The Prevention Of Accidents; Safety Instructions - Pfaff 030052000 Mode D'emploi

Wall mounted rack and pinion jack
English
Before taking into operation, please carefully read this operating instructions!
Observe the safety instructions!
File documentation!

Destined use

The wall mounted rack and pinion jack is a manually winch operated for lifting and lowering of loads.
Not suitable in hazardous location.
Not suitable for use in corrosive atmosphere.
Power operation is not allowed.
The jack is not designed for continuous operation.
Alterations to the wall mounted rack and pinion jack as well as the incorrect fitting of accessories are only
allowed with our written approval.
Pay attention to the technical data and functional description!

Regulations for the Prevention of Accidents

Observe any rules which are valid for the respective country.
Presently valid in Germany:
UVV BGV D8 winches- lifting and pulling devices
DIN 7355 Steel jacks
EC directive 98/37/EC
1) in the respective version

Safety Instructions

Operation, installation and maintenance work should only be executed by personnel who are:
competent
rained
familiar with the relevant regulations
Do not grease or lubricate the brake mechanism!
Moving of people by the winch or of loads over people is strictly forbidden.
Never touch moving parts.
Defects must be repaired immediately by competent trained personnel.
The load must not be left suspended without supervision,
Only centric forces are allowed to introduce in the toothed rack of the jack.
Flank forces are not allowed.
Do not exceed the capacity corresponding the technical data.
Before taking into operation, a competent person must check:
the lifting device
the load bearing parts of the structure
mounting
Daily examinations
brake functions - visual examination of the security parts like:
the load carrying medium
The winch should be given a thorough examination by a competent person at least once a year.
Always ensure the maintenance intervals are adhered to.
Only use original accessories and spare parts; otherwise safe function is not guaranteed.
design changes under reserve
1.3.102
1)
crank, pawl, fixing etc.
page 7
!