switel DET 357X ECO Mode D'emploi page 64

Connecting the base station
Attention: Position the base station at least 1 m away from other
electronic devices, otherwise there is a risk of mutual disturbance.
Connect the base station as illustrated in the diagram. For reasons of safety,
only use the power adapter plug and telephone connection line supplied.
Telephone line socket
Attention: With regard to the base station, use the power
adapter plug model No. ED 351 406 5030P, bearing the
output data: 7,5 V, 300 mA.
Connecting the charging station
Connect the charging station as illustra-
ted in the diagram. For safety reasons,
only use the power adapter plug sup-
plied.
Attention: With regard to the charging station, use the power
adapter plug model No. SA 28−146, bearing the
output data: 7,5 V, 200 mA.
Inserting the batteries
Insert the batteries in the open battery com-
partment. Only use batteries of the type AAA
NiMH 1,2 V.
Pay attention to correct polarity.
Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the base/
charging station for at least 24 hours.
When the handset is inserted in the base/charging station properly, you will
hear an acoustic confirmation signal. The handset warms up during the char-
ging process. This is normal and does not represent a risk. Do not charge
the handset with charging units from other manufacturers.
1
64
Mains power outlet
Only applies to telephone sets with at least two handsets .
Section Package contents" on Page 63.
1
Mains power outlet
32