Publicité
Les langues disponibles
Les langues disponibles
User Manual
Product Diagram & Installation
Front Panel
Power – This LED will illuminate red when the unit is switched on or on standby
Output A – Push the Out A button to switch between Input 1 and Input 2. The corresponding LED will
illuminate green.
Output B – Push the Out B button to switch between Input 1 and Input 2. The corresponding LED will
illuminate green.
EDID:
▪
Auto: When this setting is selected, the unit will compare the 2 input resolutions and output the
lowest resolution of the 2 to ensure compatibility with the output display.
▪
Copy: When this setting is selected, the unit will copy the EDID of the display connected to Output A.
If no Output is connected, the EDID will be copied from Output B. Please note this will also copy the
connected audio from Output A.
▪
Standard: When this setting is selected, the unit will automatically output 1920x1080@60Hz with
LPCM 2.0CH to all HDMI output connections.
IR Receiver – Receive IR signals from the included IR remote.
Rear Panel
Input 1 / 2 – Connect to an HDMI source device.
Output A / B – Connect to an HDMI dsplay.
TosLink (Optical) – Connect to a TosLink (Optical) audio device and extract digital audio from Output A.
3.5mm - Connect to a 3.5mm audio device and extract analogue audio from Output A.
For installation please follow the below instructions:
Please ensure all devices are switched off before making any connections.
Connect the source devices such as a PC, Blu-ray player or games console to the HDMI matrix input ports.
Then connect the high definition displays to the HDMI matrix output ports. When all the connections are
made, connect the power supplies.
Once all the connections have been made, switch on the devices in this order: displays, HDMI Matrix,
source devices. Please allow a few minutes for the devices to handshake and for the signals to appear.
After changing EDID settings, please power cycle the matrix first. The setup will then use the adjusted
EDID settings.
IR Control
As well as manual push button control, this matrix also features IR control via the in-built IR receiver and
included IR remote control.
Power – Power the unit on or set to standby.
Output A / B:
1 / 2 – Select Input 1 or 2 to output to Output A / B.
- Switch to the opposing Input from what is currently selected to output to Output A / B. For
example, if Input 1 is currently live, push this button to switch to Input 2.
English
Publicité
