IDEAL AW 40 Mode D'emploi page 17

Unpacking (picture 1 – 3)
• Remove the Air Washer carefully from the
packaging; the top assembly is only placed
on the bottom base loosely.
• Use the original packaging for storage if you
do not use the Air Washer the whole year.
• All packaging components consist of
environmentally friendly materials.
Positioning (4 – 7)
Place the Air Washer on the floor or on a
flat, dry surface in the room. Check data
regarding the power supply on the rating plate.
• The rating plate is located on the underside
of the bottom base (4).
• Remember to ensure easy accessibility and
sufficient room for servicing and cleaning the
Air Washer.
Filling with water (8 – 10)
Only fill the water tank with fresh, cold tap
water.
Do not pressurize the water tank,
e.g. by filling it with carbonated
mineral water. Do not add essential
oils or fragrances to the water; the
plastic material could possibly be
discolored or damaged.
Close the screw cap completely to
prevent leakage from the water tank.
Putting into operation (11 – 15)
Connect the Air Washer to the mains (signal
tone) and press button A (12). The digital
display comes on and shows the current
humidity. The Air Washer is in Normal mode.
The Air Washer
• operates especially quietly in night mode
(Point G, Symbol "L" Low)
• achieves maximum humidity output (Point
G, Symbol "H" High) in normal mode
To switch off, press button A.
Operating AW 40
- 17 -