Electrical Connection - Frigor TM 200 Mode D'emploi

GB

Electrical connection

The appliance is intended for connection to
alternating current. The required voltage (V)
and frequency (Hz) are stated on the name-
plate on the rear of the appliance. Power
must be connected via an independent wall
socket outlet.
If the mains lead has been damaged, it
must be replaced with a corresponding
type supplied by the manufacturer or an
approved service centre.
Technical data
This device complies with relevant EU
directives including Low Voltage Directive
2006/95 EEC. and Electromagnetic Com-
patibility Directive 2004/108/EC
The rating plate provides various techni-
cal information as well as type and serial
number.
6