Hama 00115455 Mode D'emploi page 3

G Operating instruction
Controls and Displays
1. 2 x controller charging station
2. Charging LED
3. 4 x USB connection
4. Console stand
5. Power LED
6. USB data / charging cable
7. Micro USB connection
8. Micro USB cable
9. 100-240 V power supply unit
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• „Bluelight" multi-stand charging station for PS4
• 100-240 V power supply unit
• Detachable micro USB cable
• These operating instructions
3. Safety Notes
• This product is intended for private, non-commercial use
only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating,
and only use it in dry locations.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Keep children away from the packaging material as there
is a risk of suffocation.
• Children should be supervised to ensure that they do not
play with the product.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
2
Warning – Charging station
• Only connect the product to a socket that has been
approved for the device. The socket must be installed
close to the product and easily accessible.
• Do not continue to operate the device if it becomes
visibly damaged.
• Do not attempt to service or repair the device
yourself. Leave any and all service work to qualified
experts.
4. Getting started and operation
Note
• Please also note the advices and warnings in the
operating instructions for your game console.
• Make sure the game console is correctly inserted into
the product (Fig. and
C
• Additional explanation concerning the auto switch
off feature:
This new version of the multi-stand features a
timer which deactivates the LEDs of the charging
cradles after a certain period of time as soon as
the controllers are fully charged. This helps avoid
superfluous charging and saves energy. After a
complete charging procedure a switched off charging
LED indicates thus a fully operational controller.
• Plug the micro USB connector
into the micro USB port
station ( ) .
A
• Plug the 100-240 V power supply
easy accessible wall socket (
• After connecting the PlayStation 4 to the multi-stand via
USB, the power LED
5
Note – Mains voltage 100-240 V
• The charger is suitable for a mains voltage of 100-
240 V, so it can be used worldwide. Note that a
country-specific adapter is required.
• An appropriate selection of Hama products can be
found on www.hama.com.
).
D
of the power supply
8
on the multi-stand charging
7
into a licensed and
9
).
A
turns blue.