Faber MAES3010SS600-B Instructions D'installation page 9

Rear Ducted Installation
The Electrical Connector must be
hood to Rear Ducting mode.
Disconnect the Electrical Connector
by depressing the tabs with your
hand and also using light force on
For a horizontal ducting installation
the motor needs to be unsecured
shown.
extract the blower from the body
of the Hood and position it so the
transition opening is facing to the
rear wall (from the back remove and
in the diagram).
Once the blower is in place re-install
the 12 screws to fasten the motor to
the Hood body.
Reconnect the Connector to the
blower.
9