Safety Instructions For Installation - Kemper MULTI-THERM Instructions De Montage Et De Service

EN
Installation and use
Read the manual carefully and follow the in-
structions before installation!
Warning! Installation and maintenance must
be carried out by qualified plumbers.
Warning! Priority must be given to the nati-
onal standards and provisions on Health and
Safety Regulations.
Use
The MULTI THERM Automatic Double-Regula-
ting Valve is used for the automatic regulati-
on of hot water circulation via thermostat ele-
ment. The product must only be used for this
purpose.
Only use the Automatic Double-Regulating
Valve
- in sound condition.
- as intended.
Warranty
Warranty or liability are voided through:
- Disregard of installation instructions.
- Damage due to faulty installation.
- Unauthorised product modifications.
- Other incorrect operation.
Warning information
Please read and follow the warning informa-
tion in this instruction. Disregard of the war-
ning information may lead to injury or mate-
rial damage!
Labelling of important warning information:
Warning! Highlights risks
that may result in injury, ma-
terial damage or contami-
nation of drinking water.

Safety instructions for installation

© www.kemper-olpe.de – 03.2021/ K410014100002-00 – 7 / 32
Note! Indicates hazards that
may lead to damages to the
system or malfunctions.
Important notes for the system operator
Thermal desinfection
The valve is suitable for the thermal disinfecti-
on (T > 70 °C) of sanitary installations. When
the temperature rises to T > 70 °C, the valve
automatically switches to the thermal disin-
fection setting.
International approvals
DVGW
ÖVGW
SVGW
KTS / W270
Norms
DVGW W 551
DVGW W 553
DIN 1988-300
Disposal
Local regulations on waste re-
cycling and disposal must be
followed. The product must
not be disposed of with
household waste but must
rather be disposed of appro-
priately.
WRAS
KIWA
VA
VA 1.54/20689
WSD