Installing The Laterally Sliding Drawbridge Leveller, Type C - Novoferm NovoDock L150 Notice De Montage

8. Installing the laterally sliding drawbridge leveller, type C

8.1 Inserting the leveller into the guide profile
• Suspend the drawbridge leveller in pre-assembled form as delivered from its central point in accordance with the chapter entitled:
Attachment points for lifting equipment.
EN
• Make sure that there is adequate space to the side and position the leveller next to the guide profile attached to the loading bay surface
in such a way that the rollers can subsequently be guided into the profile from the side without catching and jamming.
• Firmly secure the end stops in the ends of the guide profile.
• Remove the lifting attachments.
• Check the leveller platform's position at rest and downward pressure when in use. Readjust if necessary.
Functional test
8.2
• Perform a functional test. Check whether the leveller can be easily slid from side to side at an angle of approximately 5° relative to the
upright face of the loading bay platform.
Instruction!
If any malfunctions are observed, secure the leveller immediately and inform the customer service organisation that is responsible
for your company.
8.3 Quick Start guide
The second Quick Start guide, which is provisionally attached underneath the leveller platform during transportation, must be
hung up in a clearly visible position on the wall, support column or similar surface in the immediate vicinity of the leveller.
8.4 Marshalling space
Adequate marshalling space must be provided for parking up materials handling equipment, if required
10
This installation manual must be given to the customer and kept safely during the entire period of use!