Philips Saeco HD 8323 Mode D'emploi page 20

the tank. Set the selection knob (17) to the " " position to
stop dispensing.
11 (Fig.2) - Fill the tank again with fresh water.
(Fig.18) - Place a large enough container under the steam
wand. Open the water dispensing knob (3) by turning it
counter-clockwise.
(Fig.19) - Turn the selection knob (15) to the "
tion and dispense the whole content of the tank by means
of the steam / hot water wand.
12 (Fig.20) - After dispensing water, set the selection knob
(15) to the " " position to stop dispensing.
(Fig.21) - Close the water dispensing knob (3) by turning it
clockwise.
13 Repeat the operations from step (8) once again, for a total
of 4 tanks.
14 (Fig.16) - Remove the fi lter holder from the unit by turning
it from right to left and rinse it with fresh drinking water.
The descaling cycle is now complete.
(Fig.2) - Fill the tank again with fresh water. If necessary,
prime the circuit as described in section 4.5.
The descaling solution is to be disposed of ac-
cording to the manufacturer's instructions
and/or the regulations in force in the country of use.
11 DISPOSAL
- The packing materials can be recycled.
- Appliance: unplug the appliance and cut the power cord.
- Deliver the appliance and power cord to a service center or
public waste disposal facility.
This product complies with eu directive 2002/96/EC.
The symbol on the product or on its packaging indi-
cates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inap-
propriate waste handling of this product. For more detailed in-
formation about recycling of this product, please contact your
local city offi ce, your household waste disposal service or the
shop where you purchased the product.
• 20 •
" posi-