Husqvarna K 4000 Manuel D'utilisation page 24

K 4000
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with directive
2000/14/EC. The difference between guaranteed and measured sound power is that the guaranteed sound power
also includes dispersion in the measurement result and the variations between different products of the same model
according to directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to EN ISO 19432, is calculated as the time-weighted energy to-
tal for different sound pressure levels under various working conditions. Reported data for equivalent sound pres-
sure level for the product has a typical statistical dispersion (standard deviation) of 1 dB (A).
Note 3: Equivalent vibration level, according to EN ISO 19432, is calculated as the time-weighted energy total for
vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
Recommended abrasive and diamond
cutting blade
Cutting blade, mm (inch)
Max. peripheral speed, m/s (ft/s)
Max. blade speed, rpm
Max. cutting depth, mm (inch)
Max. cutting depth with the Vac attachment, mm (inch)
CAUTION: The below recommendations apply to minimum cable area relative to the maximum extension
cable. Follow the recommendations to avoid impaired performance and damage to the product.
Cable area
Input voltage 100-120 V
Input voltage 220-240 V
24
2
.
350 (14)
100 (19600)
3900
125 (4 59/64)
119 (4 11/16)
2
1,5 mm 2,5 mm
20 m 40 m
30 m 50 m
2
397 - 001 -