How To Change The Bulb - De Dietrich DRS 914 JE Guide D'installation Et D'utilisation

28
Take the foods out of the frozen and fresh
food compartment, wrap them into some lay-
ers of paper or cloth. Put them to a possible
cool place while defrosting.
Break the circuit of the appliance and leave
the doors of frozen and fresh food compart-
ment open.
Continuously blot off the defrosting water by a
soft cloth or sponge.
After defrosting wipe the surfaces, apply volt-
age to the appliance and put the foods back
to their places.
It is recommended to operate the appliance
at the highest position of the thermostatic
control so that it can reach the proper storing
temperature as soon as possible.

How to change the bulb

Disconnect the appliance from the electricity
supply.
Empty all foods and clean the appliance,
leaving the doors ajar to prevent unpleasant
smells.
Should the light fail to work you can change it
as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp
cover, then take the lamp cover off in the
direction of arrow and the bulb can be
changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)
Cleaning
Never use metal objects for clean-
ing your appliance as it may get
damaged.
NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will
damage the surface and leave a strong
odour.
Clean the inside with warm water and bicar-
bonate of soda. Rinse and dry thoroughly.
To guarantee a safe operation of the fridge,
once a year remove the ventilation grill at the
base and clean the air channels with a vacu-
um cleaner.
After changing bulb replace the lamp cover,
screw the plate screw and apply voltage to
the appliance.
The lack of light does not influence operation
of the refrigerator.