De Dietrich DRS 914 JE Guide D'installation Et D'utilisation page 34

34
1. Fit the appliance in the niche by making
sure that it stands against the interior sur-
face of the unit on the side where the door
hinges of the appliances are fitted. Insert
the appliance until the upper strip butts up
against the unit (1) and make sure that the
lower hinge is in line with the surface of
the unit (2).
2. Open the door and push the appliance
against the side of kitchen furniture oppo-
site to that of the appliance hinges. Fasten
the appliance with 4 screws (I) provided in
the kit included with the appliance.
3. Press in the joint covers between the
appliance and the kitchen furniture.
4. From the plastic cover (E), which is used
to cover the hinge with the pivot pin, you
must take away the part as indicated in the
drawing.