How To Change The Bulb - De Dietrich DRS 915 JE Guide D'installation & D'utilisation

Masquer les pouces Voir aussi pour DRS 915 JE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Clean the inside with warm water and bicar-
bonate of soda. Rinse and dry thoroughly.
To guarantee a safe operation of the fridge,
once a year remove the ventilation grill at the
base and clean the air channels with a vacu-
um cleaner.

How to change the bulb

Should the light fail to work you can change it
as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp
cover, then take the lamp cover off in the
direction of arrow and the bulb can be
changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)
After changing bulb replace the lamp cover,
screw the plate screw and apply voltage to
the appliance.
When the appliance is not in use
Disconnect the appliance from the electricity
supply.
Empty all foods and clean the appliance,
leaving the doors ajar to prevent unpleasant
smells.
The lack of light does not influence operation
of the refrigerator.
25

Publicité

Table des Matières
loading

Table des Matières