Preparation; Attery Ack Recautions; Charging The Battery Pack - Kenwood TK-2180 Mode D'emploi

Masquer les pouces Voir aussi pour TK-2180:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

B
P
ATTERY
ACK
◆ Do not recharge the battery pack if it is already fully charged.
Doing so may cause the life of the battery pack to shorten or the
battery pack may be damaged.
◆ After recharging the battery pack, disconnect it from the
charger. If the charger power is reset (turned ON after being
turned OFF), recharging will start again and the battery pack will
become overcharged.
◆ Do not use the transceiver while charging the battery pack.
We recommend you switch the transceiver power OFF while
charging is taking place.
◆ Do not charge the battery pack when the battery pack or
transceiver is wet, to avoid the risk of fire or damage. Wipe
the water from thebattery pack or transceiver using a dry cloth
before charging.
◆ Do not short the battery terminals or dispose of the battery by
fire.
◆ Never attempt to remove the casing from the battery pack.
C
HARGING THE
For charging procedures, refer to the KSC-32 Instruction
Manual.
2

PREPARATION

P
RECAUTIONS
B
P
ATTERY
ACK

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tk-3180

Table des Matières