Trunking Zones; Placing A Dispatch Call; Receiving A Dispatch Call - Kenwood TK-2180 Mode D'emploi

P D
LACING A ISPATCH
1 Select the desired zone and group ID using the selector
and the Zone or CH/GID keys.
2 Press and hold the PTT switch.
3 If the "PTT Proceed" tone sounds, communication is
possible; start speaking into the microphone. Release the
PTT switch to receive.
• For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
• Your dealer can deactivate the Proceed PTT tone, if necessary.
Ask your dealer for details.
R D
ECEIVING A
1 When a dispatch call is received, the transceiver will
automatically change to the correct group ID and you will
hear the call.
2 Readjust the volume as necessary.

TRUNKING ZONES

C
ALL
C
ISPATCH ALL
19