Tools Needed For Installation; Materials Supplied - Thermador T24UR925RS Guide D'installation

Tools needed for installation

Tape Measure Philips Screwdriver Level
These are the tools that you may need for the installation of the appliance. However, if you need to
modify the counter or cabinetry to fit the unit, you may need other tools to make counter/cabinetry
modifications before installing the appliance.

Materials supplied

Anti-tip-bracket. 2 pieces. Screws for Overlay Panel:
Screws: 2 pieces. ART001T73840 (TRUSS M4X34
Door Stopper Pin: 1
TAPPING). 8 pieces. ONLY FOR
T24UR905LP AND T24UR905RP
1 Insulating Foam (Not
MODELS.
illustrated)
20 1/2"
(520mm) x 29 1/8" (740mm)
x 1/8" (3mm)
Page | 4