Application - Marmitek DOORPHONE 120 Guide Utilisateur

LCD Icons
Light up constantly - flickering
Icon Status
Someone is at the front door
Someone is at the back door
Missed call
Out of range
Line busy
Ringtone selected
Bell illumination selected
Vibration function selected
Ringtone and illumination selected

6. APPLICATION

• Switch the handset on or off by keeping the on/off button (8) pressed and held for
approximately 3 seconds.
• When switched on, the LCD screen shall illuminate.
• Now press the doorbell button (1) of the door unit. You will hear the ring tone and the door
bell indicator light (2) will go on. The doorbell indicator light shall stay on until the handset is
answered or the call is cancelled. When the handset is not answered, the door unit will stop
calling automatically after 40 seconds and the doorbell indicator light will go off.
DOORPHONE 120™
Icon Status
Ringtone and vibration selected
Illumination and vibration selected
Ringtone, illumination and vibration
Door opener
Battery low external unit
Battery low handset
Battery level
Volume
13