Abicor Binzel PP Série Mode D'emploi page 18

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Designated Use
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Responsibilities of the user
2.3 Personal protective
equipment (PPE)
3 Technical Data
3.1 Signs and symbols used
3.2 Classification of the warnings
3.3 Emergency information
4 Putting into operation
4.1 Mounting the liner
4.1.1 Liner
4.1.2 Liner (plastic)
4.2 Connecting the cable assembly
EN - 2
EN-3 4.3 Connecting the PP control lead
EN-3 4.3.1 Control board connection
(optional)
EN-3 4.4 Setting the shielding gas quantity EN-11
EN-3 4.5 Feeding in the wire
EN-3
5 Handle operating elements EN-12
EN-4 5.1 Trigger function
5.2 Potentiometer control (optional) EN-12
EN-4
EN-5 6 Operation
EN-5
EN-6 7 Putting out of operation
EN-6 8 Maintenance and cleaning EN-13
EN-7 8.1 Replacing the wire feed roll
EN-7 8.2 Replacing liner in torch neck
EN-8 8.3 Cleaning the wire guide
EN-9 8.4 Torch neck
PP
EN-9
EN-10
EN-11
EN-12
EN-12
EN-13
EN-14
EN-14
EN-15
EN-15