gourmetmaxx KA-6510 Mode D'emploi page 27

The preparation time counts down from the time when the appliance was previ-
ously switched off.
• If you want to add small amounts of food or spices etc. to the food container dur-
ing preparation, you can just remove the measuring cup from the lid instead of the
entire lid, and add the required foodstuff through this opening in the lid.
• Preparation can be interrupted manually at any time by pressing the Start/Stop
button.
• The appliance is furnished with overload protection. In case of overload, the ap-
pliance switches off automatically. The red indicator lamp (ÜBERLASTUNG =
overload) lights up and the appliance beeps. In this case pull the plug out of the plug
socket and wait for 15 minutes before using the appliance again.
Setting time, temperature and speed manually
1. Connect the appliance to a properly installed, well accessible plug socket and place the ON/
OFF switch in position I. The top line of the display shows 00 : 00 (display of the prepara-
tion time) and in the bottom line 0
speed).
2. Preparation time: Press the Zeit button (time) once. The minutes display fl ashes. You can
now set the minutes with the + and - buttons. By pressing the button once, the minute dis-
play is increased or decreased by 1 minute. Press the Zeit button (time) a second time. The
seconds display fl ashes. You can now set the seconds with the + and - buttons. By pressing
the button once, the second display is increased or decreased by 1 second. The maximum
preparation time that can be set is 90 minutes.
3. Cooking temperature: Press the Temp button. The temperature display fl ashes. You can
now set the required cooking temperature with the + and - buttons. The temperature dis-
play is increased or decreased by 10 °C, starting at 30 °C. The maximum cooking tempera-
ture that can be set is 120 °C.
• If you want to set a cooking temperature, you must fi rst set the preparation
time. Else the Temp button is not activated.
• If you do not want to set a cooking temperature, you can set the preparation
time and motor speed in any sequence.
4. Motor speed: Press the Motor button. The speed display fl ashes. You can now set the
required motor speed with the + and - buttons. By pressing the button once, the speed is
increased or decreased by 1. The maximum motor speed that can be set is 9.
• The appliance is designed in such a way that when a cooking temperature is set,
a motor speed must also be set. Else the appliance will not start. A maximum
motor speed of 5 can be set if a cooking temperature has been set.
• The appliance can be started even if only the motor speed has been set. In this
case the appliance operates for 20 minutes and then stops automatically.
5. Press the Start/Stop button to start the appliance. The appliance starts to operate and the
set preparation time starts to count down. If only a motor speed was set, the preparation
time counts up. If a cooking temperature was set, the orange indicator lamp (HEIZEN =
heating) lights up.
06160_DE-GB-FR-NL_A5_V3.indb 27 06160_DE-GB-FR-NL_A5_V3.indb 27
0 (display of cooking temperature
27
display of motor
24.09.2013 10:40:11 24.09.2013 10:40:11