Double-Function Parking Brake; Mounting The Footrests; Locking And Unlocking The Footrests; Toilet Bucket - Drive DeVilbiss Healthcare TRS 130 Mode D'emploi

EN

Double-function parking brake

To apply the brake, press the lever downwards (photo 5).
At the same time, the directional position of the wheel is
blocked.
To release the brake, press the head of the lever down-
wards (photo 6).
5

Mounting the footrests

Hang the provided footrests with the two holes on the
respective retaining pins as shown (photo 7+8).

Locking and unlocking the footrests

To lock the footrests, swiv-
el them to the center un-
til they audibly click into
place. To unlock them,
press the lever inwards as
shown and move the foot-
rests to the side (photo 9).
12
Drive Medical GmbH & Co. KG | Last updated: 31.03.2020 | Errors and alterations excepted
6

Toilet bucket

Always insert and remo-
ve the toilet bucket from
the rear (also with the co-
ver on). The toilet bucket
snaps into place and the
toilet seat can be easi-
ly lifted off for cleaning
(photo 10).

Height adjustment of the footrests

To adjust the height of the footrests, first loosen the
clamping screw (photo 11) with the wrench provided.
After shifting, the footrests can be adjusted (photo 12)
for lower leg lengths of 420 – 500 mm.
Tighten the clamping
screw. The heel strap can
optionally be attached
using the Velcro fastener
(photo 13).
IMPORTANT:
Never use footrests to
assist with standing up!
Instructions for use TRS 130