Power Cord - shark Navigator Zero-M Pet Pro ZU60 Série Guide D'utilisation

2
(Click)
1
(Click)
1. Insert wand into pod.
2. Insert handle into wand.
3. Attach hose to back of vacuum pod.
4. Attach hose to clip on wand.
5. Insert C-shaped clip onto base of vacuum pod and remove tape.
6. Store accessories on tool storage posts.
For proper operation, ensure all parts are firmly clicked into place.
sharkc le a n.com
ASSEMBLY
(Click)
(Click)
4
(Click)
3
5
UPPER CORD HOOK
For cord access, rotate upper hook down and
remove cord.
ASSEMBLY
Cord Clip
Upper Cord Hook
6
Tool Storage Posts

POWER CORD

CORD CLIP
Use cord clip located on the side of wand to
hold cord in place while vacuuming.
s ha r kc lea n.com