shark Navigator Pet Pro ZU62 Guide De Démarrage Rapide

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A Vacuum
Handle & Hose
B
C Wand
D Hose Holder
ASSEMBLY
(Click)
C
A
(Click)
(Click)
(Click)
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
Navigator™ Pet Pro
E Duster Crevice Tool
Upholstery Tool
F
F Dusting Brush
E
B
F
G
D
EMPTYING THE DUST CUP
Empty the dust cup after each use.
MAINTENANCE
Remove dust cup to access foam
Cover
Foam
latch
and felt filters. Next, press down
Felt
top of filter door. Tilt filter door
and lift out. Press tab at top of
HEPA filter and pull away from the
base of the vacuum.
To reinstall, insert HEPA filter into
Post-Motor
unit and replace the filter door.
Filter
Wash filters every 3 months to keep the suction strong.
Rinse filters with water only and allow to air-dry completely.
Tap loose dirt from foam filters as needed between washes.
Brushroll access
Unlock Open Cover
Use a coin to turn locks, then lift
cover open. Clear the debris intake.
Shark's Zero-M™ self-cleaning brushroll delivers non-stop
hair removal. Remove any blockages or objects stuck on or
around the brushroll.
If any hair is wrapped around brushroll, extending cleaning
time will help it clear.
clean
Clear Intake