ShelterLogic Peak Shelter Manuel D'assemblage page 5

4. CONNECT THE FRONT END RIB TO THE MIDDLE RIB
A. With help, move the front end rib into the desired staked area.
B. Place the ShelterLock
C. From the outside of the rib insert the bolt through the upright and then through the ShelterLock
D. Place the first Cross Rail (02030) over the bolt and nest it into the ShelterLock
Repeat for other side.
10210 800260
01010
Fig.4
5. CONNECT THE REAR END RIB
A. Cross Rails #02031 connect to #02030 at the middle ShelterLock
B. Place the Wind Brace (10135) under the Cross Rail as shown.
Repeat for other side.
800260
10210
01010
10150
Fig. 5
(800260) on the upright as shown in Fig. 5.
®
02030
10150
.
®
Page 5
.
®
.
®
800260
10210
01010
02031
10210
01010
10114
01010
01010
05_10JT33_A4
02030
10150
10114