Dörr DLP-1000 RGB Notice D'utilisation page 12

104 Cop Car Light
105 Television Light
106 Lightning Light
07.1 MENU CCT
Here you can set the desired colour temperature, green-magenta correction
and brightness. Press the CCT button (8). The LCD display shows the following
overview:
CCT : 3000K
GN : 5
BRT : 100%
R:70 G:5
Battery capacity indicator
CCT (colour temperature)
GN (green-magenta correction)
BRT (brightness)
R:/G:/B:/W: (values)
07.1.1 Input field CCT = select colour temperature
Turn the control dial (11) to the desired colour temperature. Setting from
2700 K - 9999 K. Press the CCT button (8) to confirm your selection and to enter
the next input field.
07.1.2 Input field GN = green-magenta correction
Turn the control dial (11) to the desired value. Setting from 0 - 255. Press the con-
trol dial (11) to confirm your selection and to enter the next input field "Brightness".
07.1.3 Input field BRT = select brightness
Turn the control dial (11) to the desired brightness. Setting from 0% - 100%.
07.2 PRE-SETTINGS (CCT)
First press the CCT button (8) and then the menu button (6). Turn the control dial (11)
to select the desired menu point. Press the control dial (11) to enter the input fields.
Menu
RGBW Dimming
Preset Temp
Light Source
B:5 W:255
07.2.1 RGBW dimming
R : 40
B : 0
Here you can select the desired red, green, blue and white values. Turn the con-
trol dial (11) to select the desired value. Press the control dial (11) to confirm your
selection and to enter the next input field.
R Red: 0-255 G Green: 0-255
Press the menu button (6) to return to overview.
07.2.2 Pre-set Colour Temperatures
Preset Temps
Here you have the possibility to save your 8 most used colour temperatures.
Before you open this menu point, first select the colour temperature at the LED
light as described in chapter 07.1. Then press the menu button (6). Turn the con-
trol dial (11) until menu point "Preset Temp" is highlighted. Press the control dial (11).
Turn the control dial (11) to select a memory location number from 1 - 8. Press the
control dial (11) to confirm your selection and to save the selected colour tempera-
ture. Press the menu button (6) twice to return to overview.
07.2.3 Pre-set Light Source
Light Source
Source: 11
Incandescent
Halogen
Here you can choose between 10 pre-set light sources. Turn the control dial (11) to
browse through the various pre-settings. Press the control dial (11) to confirm your
selection. Press the menu button (6) twice to return to overview.
12
RGBW
G : 70
W : 0
B Blue: 0-255 W White: 0-255