Operation Via App - Judo SOFTwell Instructions De Montage

9. Lock the electronic housing with the two snap-fits on the control head (see Figure 10).
Position the rear wall of the electronic housing correctly (see Figure 11).
Fig. 10: Lock into place place snap-fits
10.Plug the power supply unit in.
11.Connect the LAN cable of the system to the router.
The home network router must be configured so that internal IP addresses are
INFO_NO_HEADER
automatically allocated via DHCP. In general this is the factory setting.
The connectivity module connects automatically to the JUDO server.
The connection is TLS-encrypted to ensure secure data transfer.
INFO_NO_HEADER
7

Operation via app

The JU-Control App is available for free from the Android Play Store or iOS App Store and
can be installed on an Android or iOS smartphone or tablet. Upon first starting of the app,
the user must register and accept the data protection declaration. Then an email is auto-
matically sent to the email address in the registration data. This email contains a confirma-
tion link. Clicking this link completes the registration process.
Then a location must be created. Location data (town, street, location name) can be
entered and saved in the input form of the new location. After selecting the location, a new
device can be added. After confirmation of the button 'Add device', two options are offered:
• Button 'Scan QR-code'. This button can be pressed if the device used has a camera
function. The camera function enables scanning of the QR code on the device casing or
on the connectivity module.
• Button 'MAC address' After pressing this button, the connectivity module MAC address
can be entered via the keypad. Optionally a device name can be added for the water
softening system.
Then the added device is saved and appears in the device overview.
After device selection the operating and monitoring functions are displayed.
14
Operation via app
Fig. 11:
JUDO Connectivity-Modul
Lock into place rear wall of elec-
tronic housing
1702929 • 2019/08