Locating A Disc By Name; List-Up; Selecting The Specific Tracks For Playback; Bank/Custom File - Sony XR-C900RDS Mode D'emploi

Locating a disc by name

— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 20).
1
Press (LIST) momentarily.
The names assigned to the disc currently
playing and the next disc to be played
appear in the display. The name assigned to
currently playing disc is flashing.
LST 4 SCHUBERT
5 BACH
EQ SUR
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• To go back the display, press (DSPL). Once a disc name
has been displayed for five seconds, the display goes back
to its normal playback mode.
• The track names are not displayed during MD playback.
• If there are no discs in the magazine, "NO Disc" appears
in the display.
• If a disc has not been assigned a custom file, "********"
appears in the display.
• If the disc information has not been read by the unit, "?"
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
• The information appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Selecting the specific
tracks for playback

— Bank/Custom File

(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (P.MODE) for two
seconds.
Bank edit mode
CD1 Bank edit
2 2
EQ SUR
DISC TRACK
Play
Note
If you have not labeled the disc, the bank edit mode does
not appear and the program edit mode appears. To go back
to the normal playback mode, press (3) (P.MODE) for
two seconds.
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (5) (ENTER).
CD1 Bank edit
2 4
EQ SUR
DISC TRACK
The indication changes from "Play" to
"Skip." If you want to return to "Play,"
press (5) (ENTER) again.
3
Repeat step 2 to set the "Play" or "Skip"
mode on all the tracks.
4
Press (3) (P.MODE) for two seconds.
5
Press (SHIFT).
Notes
• You can set the "Play" and "Skip" mode on up to 24
tracks.
• You cannot set the "Skip" mode on all the tracks.
Playing the specific tracks only
You can select:
•Bank on to play the tracks with the "Play"
setting.
•Bank inv (inverse) to play the tracks with the
"Skip" setting.
1
During playback, press (SHIFT), then
press (3) (P.MODE) repeatedly until
"Bank" appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z Bank on z Bank inv
CD1 SCHUBERT
Bank on
EQ SUR
BANK
Playback starts from the track following the
current one.
3
Press (SHIFT).
To go back to the normal playing mode, select
"Bank off" in step 2 above.
Skip
z Bank off
EN
21