Sony XR-C900RDS Mode D'emploi page 19

Erasing the entire programme
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display "PGM edit".
2
Press (1) (N) repeatedly until "DEL"
appears.
DEL PGM edit
--PGM1--
EQ SUR
To erase Programme 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
P1 PGM edit
NO Data
EQ SUR
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (P.MODE) for two seconds.
5
Press (SHIFT).
Adding tracks to the programme
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display "PGM edit".
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
Track slot number
CD1 PGM edit
2 4 P1.‚3
EQ SUR
DISC TRACK
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
5
6
Erasing the tracks in the
programme
1
PGM1
2
3
4
5
6
Note
Once all 12 slots have been filled, "*Mem full*"
appears in the display, and you cannot insert tracks.
When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
Press (SHIFT).
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display "PGM edit".
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
Press (1) (N) or (4) (n) to select the
track you want to erase.
Track Slot Number
CD1 PGM edit
2 4 P1.‚6
EQ SUR
DISC TRACK
The track currently registered in slot 6 of
Programme 1.
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DEL PGM edit
P1.‚6
EQ SUR
DISC TRACK
To continue erasing tracks, repeat steps
2 and 3.
When you finish erasing tracks, press (3)
(P.MODE) for two seconds.
Press (SHIFT).
EN
19