Adjusting Trimmer For User; Adjusting Length Of Shaft; Adjusting Angle Of Control Handle; Adjusting The Loop Handle - Stihl FSE 52 Notice D'emploi

7 Adjusting Trimmer for User

► Ease the ends of the loop handle (2) apart and push it onto
the control handle until it engages in position.
► Insert the screw (3) through the hole.
► Fit the star knob nut (1) and tighten it down.
The loop handle (2) must not be removed again.
7 Adjusting Trimmer for User
7.1

Adjusting Length of Shaft

The length of the shaft can be adjusted to suit the height and
reach of the user.
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
► Hold the shaft firmly.
1
2
► Depress lock button (1) and hold it in that position.
► Pull or push the control handle (2) to the required position.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
7.2

Adjusting Angle of Control Handle

The control handle can be set to two positions (0° and 90°).
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
► Hold the shaft firmly.
0458-777-9621-A
3
► Depress lock button (1) and hold it in that position.
► Turn the control handle (2) 90° on the shaft.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
7.3

Adjusting the Loop Handle

The loop handle can be set in different positions to suit the
height and reach of the user.
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
► Loosen the star knob nut (1).
► Swing the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
1
2
2
1
English
35