Sony SA-VE705 Mode D'emploi page 13

SA-WMS7 (subwoofer)
(SA-VE705 and SA-VE702 only)
System
Speaker system
Speaker unit
Enclosure type
Practical maximum output
Reproduction frequency range
Inputs
LINE IN (input pin jack)
SPEAKER IN (input terminals)
Outputs
LINE OUT (output pin jack)
SPEAKER OUT (output terminals)
General
Power requirements
USA and Canada:
Europe:
Others:
Power consumptions
Dimensions (w/h/d)
Mass
Supplied accessories
SA-VE705
Speaker stands (for the front and rear speakers) (4)
Speaker stand (for the center speaker) (1)
Screws (for the speaker stands) (10)
Washers (for the speaker stands) (10)
Plates (for the front and rear speaker stands) (4)
Speaker grilles (5)
Hex wrench (1)
Audio connecting cord (1)
Speaker connecting cords, 2.5 m
1
(8 ft 2 / in.) (5)
2
Speaker connecting cords, 10 m
3
(32 ft 9 / in.) (2)
4
SA-VE702
Speaker stands (for the front speakers) (2)
Screws (for the speaker stands) (4)
Washers (for the speaker stands) (4)
Plates (for the front speaker stands) (2)
Speaker grilles (2)
Hex wrench (1)
Audio connecting cord (1)
Speaker connecting cords, 2.5 m
(8 ft 2 1 / in.) (4)
2
Active subwoofer,
magnetically shielded
Woofer: 20 cm (8 in.),
cone type
Advanced SAW type
120 W
24 Hz - 150 Hz
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
80 W
Approx. 230 × 380 ×
× 15 ×
1
470 mm (9 /
8
5
18 / in.), including front
8
grille
Approx. 17 kg
(37 lb 8 oz)
SS-V703
Speaker stands (for the rear speakers) (2)
Speaker stand (for the center speaker) (1)
Screws (for the speaker stands) (6)
Washers (for the speaker stands) (6)
Plates (for the rear speaker stands) (2)
Speaker grilles (3)
Hex wrench (1)
Speaker connecting cords, 2.5 m
(8 ft 2 1 / in.) (1)
2
Speaker connecting cords, 10 m
3
(32 ft 9 / in.) (2)
4
Design and specifications are subject to change
without notice.
13 GB