Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
○ During work, if the saw chain or guide bar
become entangled in the tree, switch off and
use a wedge.
14. During
use,
if
deteriorates, or you notice any abnormal
sound or vibration, immediately switch off and
discontinue use, and return to your Hitachi
Authorized Service Center for inspection or
repair.
If you continue using, injury may occur.
15. If the unit is accidentally dropped or exposed to
impact, inspect carefully for damage or cracks
and ensure there is no deformation.
If the unit is damaged, cracked or deformed,
injury may occur.
16. When transporting the unit by car, secure the
unit to prevent it moving.
There is a risk of accident.
17. Do not switch the unit on while the chain case is
attached.
Injury may occur.
18. Ensure there are no nails and other foreign
objects in the material.
If the saw chain impact on the nail etc., injury
may occur.
19. To avoid the guide bar becoming entangled
with the material when chopping on a verge
or when subject to the weight of material while
cutting, install a supporting platform close to
the cutting position.
If the guide bar becomes entangled, injury may
occur.
20. If the unit is to be transported or stored after
use, either remove the saw chain, or attach the
chain cover.
If the saw chain comes into contact with your
body, injury may occur.
21. Adequately care for the unit.
○ To ensure work can be performed safely and
effi ciently, care for the saw chain to ensure it
provides optimal cutting performance.
○ When replacing the saw chain or guide bar,
maintaining the body, fi lling oil etc., follow the
instruction manual.
22. Ask the shop to repair the unit.
○ Do not modify this product, since it already
complies with the applicable safety standards.
○ Always refer to your Hitachi Authorized Service
Center for all repairs.
Attempting to repair the unit yourself may result
in an accident or injury.
23. When not using the unit, ensure it is properly
stored.
Drain off the chain oil, and keep in a dry place
out of reach of children or a locked location.
the
unit
performance
24. If the warning label is no longer visible, peels
off or is otherwise unclear, apply a new warning
label.
For the warning label, refer to your Hitachi
Authorized Service Center.
25. When working, if local rules or regulations
apply, comply with the same.
IMPORTANT SAFETY
INSTRUCTIONS FOR BATTERY
CHARGER
WARNING
Death or serious bodily injury could result
from improper or unsafe use of battery
chargers. To avoid these risks, follow these
basic safety instructions:
READ ALL INSTRUCTIONS
1. This manual contains important safety and
operating instructions for battery charger
Model UC36YRSL.
2. Before
using
battery
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
3. To reduce risk of injury, charge HITACHI
rechargeable battery type BSL3620. Other
type of batteries may burst causing personal
injury and damage.
4. Do not expose battery charger to rain or snow.
5. Use of an attachment not recommended or
sold by the battery charger manufacturer may
result in a risk of fi re, electric shock, or injury to
persons.
6. To reduce risk of damage to electric plug and
cord, pull by plug when disconnecting battery
charger.
7. Make sure cord is located so that it will not
be stepped on, tripped over, or otherwise
subjected to damage or stress.
8. An extension cord should not be used unless
absolutely
necessary.
extension cord could result in a risk of fi re and
electric shock.
If extension cord must be used make sure:
a. That blades of extension cord are the same
number, size, and shape as those of plug on
battery charger:
b. That extension cord is properly wired and in
good electrical condition; and
c. That wire size is large enough for AC
ampere
rating
specifi ed in Table 1.
English
charger,
read
Use
of
improper
of
battery
charger
all
as
9
Publicité
Table des Matières
Dépannage
